Відео

Romex (aka NM cable) should never be run exposed, EXCEPT between joists. That includes between studs. If it is exposed within easy access, it should be in conduit.

Hall William Thomas Steven Martin Timothy

Amazing.

I would have screwed in the unused screws on the outlet.

Loved this , subbed :)

I know this all worked… for now. But there’s quite a few code violations here. And that outside outlet isn’t going to stay in place for long as the stucco is going to crumble under load from the box and swing arm clamps as things are plugged in and unplugged.

Hey that’s Hendry’s beach in SB! Also that’s for the video. Setting mine up this weekend.

Unfortunately not working with mac os Sonoma

How annoying, next time lose the kid!

Worked perfectly!!! Thanks

P. S. - Love your FM radio deejay voice.

Excellent video and narration. Completely understandable and to the point. Much appreciated!

the best way, thanks a lot

Anytime I do a DIY project I like to watch a few videos to brush up as prep. This was like the 3rd video I watched and I thought “his voice sounds familiar!” Then I saw your channel name and realized “hey I know him IRL!” Thanks for the video, really well done! Hope things are going good for you! Now to go try and install an outlet for the RV pad at my house so I can stop running ridiculously long extension cords haha.

Great video! Super informative and loved the narration too! 🙌🏼

its an awesome video but the extra sounds and voice overs totally kill whatever you're trying to instruct.

THANK YOU!!!

I need to have the siding outside tho

Can you add links to buy the Y assembly at the beginning of the video? You mention it’s expensive but where / what.

Watched many tutorials but didn’t understand a thing until I watched this one. Will definitely save this! Thank you!!!!

Thanks for the review. I am currently using qc35 with ufly on the 787-9. I will be upgrading to the a30's. Having thr XLR power the system will be a game changer. In regards to the glasses. Have you tried Sereghetti drivers gradient. Non-polarized, with enough gradient to read charts. Also the arms on the glasses are so thin you don't notice them under the seal. Thanks again for the review!

If I'm not using smart switches, but simple old school toggle switches, then the switches will not have neutral (white) wires to connect to the cluster of other neutrals in the box, correct? Simply connect the black "line" wire coming from the breaker panel to each switch, the unique wires to each switch, and a ground wire from each switch to the cluster of grounds, correct? No, neutrals from the switches to the cluster of neutrals. Sound right?

Thanks so much for this. Been searching for this exact explanation. Thank you!!

Don’t understand why you would make and especially post a video on n which you have. Kid crawling all in the frame.

Another reason to have the grandkids visit. Ha

get rid of the kid when making videos

What do I do if my garage door opener already has all four fuses in use? I can’t plug this in anywhere :/ Any help?

Thanks for the video tho!

Haha! "first you fold the strap then you get the box cutter away from the baby"

Omg thank you. Been wishing I’d taken a picture of them in the packet before using. Super easy to learn and remember. Champ!

Watched 6 so called "easy methods" then ended up here, so easy and actually works. Cheers for the excellent advice

That box isn’t for a fan install

Great method! Will give it a try!

Come on man the worse video ever

Your intro narration earns you a sub!

Loved the narration

Distracted or don't have kids? Try this version: ua-cam.com/video/USgcJL8BlBc/v-deo.html

Really dude?!

Plugging in the cords at 4min is literally the only step anyone needs help with and you offer none. 8 minutes of annoying fluff and no instruction. How is this the linked Meross resource?

Solder! lol

How expensive was this desk plus the channel and all the gadgets attached? Do you have an itemized breakdown? What are the desk's dimensions?

Nice job

Get the effing kid out of the way

I little fiddly and time consuming for my taste. But this does look the best method if you really want the straps to never fall out of the wrap.

Starting at about 10:30 you mentioned switched receptacles. While they could be different circuits, they are usually on the same circuit, especially if used for lights or something with relatively low power. Only the hot side tab is removed. If it was a separate circuit, 2 scenarios are possible. One is completely separate circuit and both tabs would be removed and you'll have 2 neutral wires and 2 hot wires. The other possibility is a multi wire branch circuit with has a shared neutral (only the hot side tab is removed) and you'll typically have red and a black wire on the hot side. Separate circuits must originate from a double pole breaker or 2 single poles tied together.

Hi there, nice review!! Question though: I am flying on the B737-NG/classic (yes yes I know) and I used to have an A20 until it got stolen. The company has A20's in the cockpit but I am still looking to own my own headset again. I never use the ANR for 2 reasons: I like to be able to hear the engines and I don't want double the energy in my ears. So, with this in mind, what is the minimum ANR setting for the proflight 2 to have the exact same sound as with the A30 without the ANR on?

I do the long strap as you do then use a velcro strip on it, leaving the ratchet loose. Next time I'm going to try this.

Thanks Kyler for the step-by-step! I had the exact same scenario (stucco, wire & paper, etc.) and followed your vid without a problem. I did add some silicone to the outside box & waterproof cover (where they meet) to ensure no leaks. Now have an exterior outlet where I can plug in my low voltage lighting transformer - yippee!!!

With all fans going to DC instead AC motors, it’s my understanding that switch control for fan speed is not good for the motor, is it better to just have a dumb switch? And use the remote provided by the fan manufacturer? I’m a little lost on that part

It amazes me how many builders do not understand this. They want to use nails or screws to bear all the weight. This is fine if you just have a minimal (non-human) load that is close to the ground. But if you have a serious load with people involved, the best method is to have the members lying on top of other members so that you get maximum load bearing possible from those members. Nails and screws should only be used to hold them in place laterally (usually with some sort of "hurricane tie" bracket). This is especially important when building decks. There have been numerous deck collapses (with deaths) because the builder (usually DIY people) didn't understand this principle. I read a story about one guy who built his own deck, had people over, and the deck collapsed killing a child that was playing underneath.